Product name:Type100 15MM Fabric with foam Office Removable Partition
Model Number:Sliding Aluminium Tracks
Product name:aluminium track
Track Position:top hanging track
Application:light weight partition wall panel
Operation:acrylic partition wall panel
Design:aluminium track roller
100 Series Track System:
For Omani-directional panels up to 650kg. Two carriers are provided per panel. Each carrier has two horizontal counter- rotating wheels that roll (not slide) in the track Each wheel has precision ground bearings, encased with POM, steel banded and reinforced. Carriers easily negotiate square or angled corners without switches. Usual dimension from the ceiling to the structure is 250mm.
Technical data of Type 100 movable partition :
Track: The tracks are made from extruded 6063 - T5 anodized aluminium. The track housing shall utilize grooves and interlocking steel pins for positive alignment of adjacent track sections, and shall be reinforced overhead by drop rod brackets. Aluminum track housing shall include an integral nut slot to accept a hardened square nut for attaching each drop rod bracket to the top of the track.
Aluminium trim: The panel trims will be standard series with exposed Aluminium trims of 10mm thickness finished in 6063 - T5 Anodized Aluminium shall be used.
Panels:The Panels will be made from 12mm MDF boards and shall be 100 mm thick and 1230 mm maximum width, made to the appropriate acoustic rating and structural backing and mounted in full perimeter extruded aluminium frames with interlocking corner construction .The panel faces shall be finished with selected material.
Seals: vinyl seal of butane rubber will be used as top and bottom and as well as closure seals for the operable wall system.Retractable seal drop will be 23 mm.