Movable partitions are becoming more and more common in our lives, especially in places where space is relatively large and partitions are very important. The movable partition can divide a whole into two parts, making the space more hidden and also making the layout of the space appear more compact.
What are the characteristics of movable partitions
1、Randomness. The use of movable partitions is very arbitrary, can be expanded or reduced according to the different sizes of space, the use of very convenient.
2, movable partition can be separated from the space, but also to ensure the privacy of the owner, have a private space, life is also more convenient.
3, secondly, the sound insulation effect of this partition is also very good, and there is a certain insulation effect.
4, usually movable partitions are very stylish in appearance, so put it in any place, can play a certain decorative role. This partition is widely used in hotels, hotels, banquet halls, office buildings and many other occasions, the decorative effect is very good.
5, the stability of the mobile partition is also stronger, will not be easy to shift position.
6, the installation of mobile partition is also very convenient, do not need to install the track on the ground, only need to install the track on the ceiling. So that the ground does not look so complicated, and once the mobile partition is installed is very stable, not easy to swing, you can rest assured that the use.
How to install the mobile partition?
1, mobile partition upper track box size to ensure that the height of 12cm, width 9cm, installed in the track box track, can be mobile partition suspended on the track.
2, the general situation mobile partition width should be more appropriate in about 80cm * 120cm, half of the recommended 120cm this structure of the door is more stable, and the appearance is also more beautiful, so the width and height of the mobile partition to ensure that the golden size.
3, when installing the mobile partition, pay attention to the best not to use the floor to the top of the mobile partition, because the swing amplitude is too large when pushing and pulling, the use of time mobile partition is easy to deformation, resulting in it can not open, affecting the use of mobile partition.
4, the installation of mobile partition track, the upper track is fixed, and then the gravity cone in the upper track at both ends and the midpoint of the upper track is installed. Pay attention to both ends of the track to put vertical lines, the lower track is fixed at three points, you can ensure that the upper and lower tracks are completely parallel, then the mobile partition can be in the best condition.